MicroTap G8 (M2,5-M8)

MicroTap G8 (M2,5-M8)

THREADING CAPACITY

Electrical supply / power
Safety regulations
Paint
Operation
Error messages
Software
M2.5 – M8 X5CrNi189 / 1.4435
M2.5 – M10 9sMn28 / 1.0715
M2.5 – M12 AlCuMgPb / 3.1645
50 – 700 Ncm / infinitely adjustable
from 470 Ncm max. 2060 min.-1
300 – 3000 RPM / infinitely adjustable
75/85mm
750mm adjustable
0 – 400mm Distance
280 x 475 x 50mm / M12x14 / DIN650 / G1/4
320/475/1290mm
230 Volts, 50 – 60Hz / 2900 Watts
– CE/EMC compliant
– RAL 6001 emerald green
– menu controlled / housing / optional PC with WinPCA program
– Audible/screen with message of the cause of the error
Languages D/GB/F/NL/B/DK/S/I/ES
Depth unit mm/inch
Metric/Inch Thread Size
Mz torque min/max Ncm
Right/left turn
Fast/slow output
Automatic start of controlled feed (automated) ZAP
FZ – Cutting input with force monitor with ZAP
Data storage for 40 programs
Automatic variable parameters for chip release
Individual or total piece counter
Programmable cooling by cycles and times
Threading and rolling programs

Tool holder B12/01 Alternative

MicroTap G8 (M2,5-M8)

Quick change system SWS1 incl. 6 Tap holders DIN371 M2-M10 /DIN374/376 M4-M11
SZS1/ collet holder system incl. 5 clamps 8-7/ 6-5/ 5-4/ 4-3/ 3-2

Software

MicroTap G8 (M2,5-M8)

Parallel interface
Serial interface
Other manufacturing programs
and applications
WinView
megatap II-G8 with RS232 and WinView
– Parallel I/O / galvanic isolation / PLC supported
– RS232 (V24) 9600 Baud / galvanic isolation
Programs for threaded inserts and connectors (for example ENSAT)
Programs to tighten screws
Continuous operation program left / right (e.g. oversizing / countersinking)
Switching output for automation / clamp / cylinder / 24VDC
Quality detection program for QND printer
Presentation PC program for the current threading subprocess for analysis of tools, lubricants and to optimize manufacturing parameters (e.g. cutting speeds)